Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thank you!
06-12-2012, 10:31 AM (This post was last modified: 06-12-2012 10:31 AM by tavvva.)
Post: #8
RE: Thank you!
(06-12-2012 12:54 AM)nechus Wrote:  Well, it's a simple and plain Deskpro. No additional numbers or labels. It has a Pentium MMX processor. That's prior to Celeron, isn't it? It has two simm ram cards.

When I switch it on I can hear some noises but no beeps, and the monitor stays blank. I mean, I know the computer is on, but it's doing nothing at all. Confused

I wonder if I spoiled something when I removed the soldered battery. I pulled and twisted like crazy. I placed a new battery between the crooked holders, but I might have damaged something. Angel

OMG! I've killed a computer!!??

1.) Try to remove the RAM from both slots and power on .... and then check if you hear any beep codes ...

2.) Reseating all parts in the slots couple of times may help to get rid of oxides ... so ... remove everything what can be removed and put back .... and repeat that several times if it doesn't help.

3.) Try to measure the power supply ... maybe one of the pins doesn't have correct voltage ....

4.) Check if all jumpers are in place ...
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Thank you! - nechus - 06-09-2012, 02:54 PM
RE: Thank you! - nl2stk - 06-09-2012, 05:46 PM
RE: Thank you! - tavvva - 06-10-2012, 07:50 AM
RE: Thank you! - nechus - 06-10-2012, 04:49 PM
RE: Thank you! - nl2stk - 06-10-2012, 06:22 PM
RE: Thank you! - tavvva - 06-11-2012, 09:55 PM
RE: Thank you! - nechus - 06-12-2012, 12:54 AM
RE: Thank you! - tavvva - 06-12-2012 10:31 AM
RE: Thank you! - nechus - 06-12-2012, 01:58 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | DeLi(cate) Linux | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication