DeLi(cate) Forum

Full Version: problem usb devices
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
hi.. i instaled delilinux 0.8 . sorry for my bad english.

my pc is pentium 1 mmx 166mhz 32mb ram
and when wanna use a usb device (mouse, storage) "lsusb" don't recognize.
i add de mod's:
usb-ohci
hid
usbcore
usb-storage
that's is ok?

thank's for your help!
(01-18-2012 01:30 AM)gregoriosamsa Wrote: [ -> ]hi.. i instaled delilinux 0.8 . sorry for my bad english.

my pc is pentium 1 mmx 166mhz 32mb ram
and when wanna use a usb device (mouse, storage) "lsusb" don't recognize.
i add de mod's:
usb-ohci
hid
usbcore
usb-storage
that's is ok?

thank's for your help!

Hello :]

lsusb doesn't work at the moment and it's not going to be fixed in DeLi 0.8.
I plan to fix it in DeLi(cate) -> If You don't want to upgrade, You can possibly use fixed packages from the DeLi(cate) repository once they are available.

We can do some troubleshooting now:
Please, provide me with Your lspci output.
(01-18-2012 09:07 AM)tavvva Wrote: [ -> ]
(01-18-2012 01:30 AM)gregoriosamsa Wrote: [ -> ]

Hello :]

lsusb doesn't work at the moment and it's not going to be fixed in DeLi 0.8.
I plan to fix it in DeLi(cate) -> If You don't want to upgrade, You can possibly use fixed packages from the DeLi(cate) repository once they are available.

We can do some troubleshooting now:
Please, provide me with Your lspci output.

hello tavvva . ah ok . maybe i will upgrade to deli(cate). do you recomended? because i see it in alpha version .
my lspci:
00:00.0 host bridge VIA tech Inc. Vt8c585vp rev 23 rev 25
0007.0 ISA vt82c586/a/b rev 25
0007.1 IDE interface VIA tech vt82c586a/Bvt82c686/a/b/vt823x bus master ide rev 06
0007.2 usb controler via tech vt82xxxxx uchi usb 1.1 controler rev 2
0009.0 vga compatible controler trident microsystem tgui 9440 rev e3
(01-18-2012 04:58 PM)gregoriosamsa Wrote: [ -> ]0007.2 usb controler via tech vt82xxxxx uchi usb 1.1 controler rev 2
This is probably typo .... uchi -> uhci

Your computer has UHCI controller, but You were trying to load OHCI module :]

What You should do in order to make the USB work:
1.) Don't load usb-ohci module ...
2.) Load uhci module instead ...

That's all ...

Please, let me know about the result ...

------------------

Btw. DeLi(cate) 0.1 alpha2 CD has been released ... It works better than DeLi 0.8 even if it is still alpha. Give it a try. It contains many bugfixes and new features.
(01-18-2012 07:11 PM)tavvva Wrote: [ -> ]
(01-18-2012 04:58 PM)gregoriosamsa Wrote: [ -> ]0007.2 usb controler via tech vt82xxxxx uchi usb 1.1 controler rev 2
This is probably typo .... uchi -> uhci

Your computer has UHCI controller, but You were trying to load OHCI module :]

What You should do in order to make the USB work:
1.) Don't load usb-ohci module ...
2.) Load uhci module instead ...

That's all ...

Please, let me know about the result ...

------------------

Btw. DeLi(cate) 0.1 alpha2 CD has been released ... It works better than DeLi 0.8 even if it is still alpha. Give it a try. It contains many bugfixes and new features.

ok.. and without the "lsusb" how can see if work's? and i will give a try deli(cate)
(01-18-2012 07:32 PM)gregoriosamsa Wrote: [ -> ]
(01-18-2012 07:11 PM)tavvva Wrote: [ -> ]
(01-18-2012 04:58 PM)gregoriosamsa Wrote: [ -> ]0007.2 usb controler via tech vt82xxxxx uchi usb 1.1 controler rev 2
This is probably typo .... uchi -> uhci

Your computer has UHCI controller, but You were trying to load OHCI module :]

What You should do in order to make the USB work:
1.) Don't load usb-ohci module ...
2.) Load uhci module instead ...

That's all ...

Please, let me know about the result ...

------------------

Btw. DeLi(cate) 0.1 alpha2 CD has been released ... It works better than DeLi 0.8 even if it is still alpha. Give it a try. It contains many bugfixes and new features.

ok.. and without the "lsusb" how can see if work's? and i will give a try deli(cate)

Just plug Your mouse or usb flash drive in and check the dmesg output or test the mouse / usb flash :]

usb mouse is reachable under the /dev/input/mice device. You can let the device file in Xorg Setup untouched ....

Eventually You can test that from the root account with the following command : cat /dev/input/mice .... this will produce a mess on the screen while moving with the mouse ...
(01-18-2012 08:56 PM)tavvva Wrote: [ -> ]
(01-18-2012 07:32 PM)gregoriosamsa Wrote: [ -> ]
(01-18-2012 07:11 PM)tavvva Wrote: [ -> ]
(01-18-2012 04:58 PM)gregoriosamsa Wrote: [ -> ]0007.2 usb controler via tech vt82xxxxx uchi usb 1.1 controler rev 2
This is probably typo .... uchi -> uhci

Your computer has UHCI controller, but You were trying to load OHCI module :]

What You should do in order to make the USB work:
1.) Don't load usb-ohci module ...
2.) Load uhci module instead ...

That's all ...

Please, let me know about the result ...

------------------

Btw. DeLi(cate) 0.1 alpha2 CD has been released ... It works better than DeLi 0.8 even if it is still alpha. Give it a try. It contains many bugfixes and new features.

ok.. and without the "lsusb" how can see if work's? and i will give a try deli(cate)

Just plug Your mouse or usb flash drive in and check the dmesg output or test the mouse / usb flash :]

usb mouse is reachable under the /dev/input/mice device. You can let the device file in Xorg Setup untouched ....

Eventually You can test that from the root account with the following command : cat /dev/input/mice .... this will produce a mess on the screen while moving with the mouse ...

ok.. my mouse have moved but not so well! Smile up and down only. what configure/protocol should put??
(01-18-2012 09:24 PM)gregoriosamsa Wrote: [ -> ]ok.. my mouse have moved but not so well! Smile up and down only. what configure/protocol should put??

That's strange .... USB mice usualy work with the Auto protocol. How about buttons? Do buttons work? Try the mouse in different computer, please. What manufacturer and model is that?
(01-18-2012 09:42 PM)tavvva Wrote: [ -> ]
(01-18-2012 09:24 PM)gregoriosamsa Wrote: [ -> ]ok.. my mouse have moved but not so well! Smile up and down only. what configure/protocol should put??

That's strange .... USB mice usualy work with the Auto protocol. How about buttons? Do buttons work? Try the mouse in different computer, please. What manufacturer and model is that?

all the buttons move the cursor to the right. i test it in other linux (arch-linux) and work with the same configuration. is a shark-net mouse model sn-alien
(01-18-2012 09:52 PM)gregoriosamsa Wrote: [ -> ]all the buttons move the cursor to the right. i test it in other linux (arch-linux) and work with the same configuration. is a shark-net mouse model sn-alien

It might be unsupported by our version of xorg ... but the update is planned soon.

does it work in console with the gpm service enabled? (You need DeLi(cate) alpha2 CD to test that). Older versions contain broken gpm package. Just try the following from the root account:

service gpm start
Pages: 1 2
Reference URL's